Author Topic: Attach file to Post  (Read 13575 times)

Offline greco558

  • Jr. Member
  • *
  • Posts: 32
Attach file to Post
« on: July 11, 2016, 07:04:34 PM »
I wanted to Post and attach a program but I can not find how to attach zipped file to post.

Am I just not seeing it or do you need permission to add attachments to a Post?


Thanks
John

Offline Frank Kotler

  • NASM Developer
  • Hero Member
  • *****
  • Posts: 2667
  • Country: us
Re: Attach file to Post
« Reply #1 on: July 11, 2016, 07:28:09 PM »
Hi John,
Welcome to the forum. There should be an "Attachments and other options" button under the input box. I think you may have to make several (3 or 4?) posts before you are allowed to attach a file (PITA - I blame the spammers). Try telling us about the file you're going to attach... and then try to attach it. If it doesn't work, tell us more about the file you're going to attach and try it again... until it works. I can be reached at fbkotler(pig's tail)myfairpoint(decimal point)net if all else fails...

Best,
Frank


Offline greco558

  • Jr. Member
  • *
  • Posts: 32
Re: Attach file to Post
« Reply #2 on: July 11, 2016, 11:39:51 PM »
Thanks Frank I will give that a try.

Best Regards,
John

Offline jordi

  • Jr. Member
  • *
  • Posts: 6
Re: Attach file to Post
« Reply #3 on: November 04, 2016, 08:26:49 PM »
Hi,

Curious place is that.

My question is: what must be done exactly before contributing to this site once you have successfully signed up?

I can't even make a post (without attachments) in the Example Code area.

Thanks in advance.

Offline debs3759

  • Global Moderator
  • Full Member
  • *****
  • Posts: 221
  • Country: gb
    • GPUZoo
Re: Attach file to Post
« Reply #4 on: November 06, 2016, 12:46:30 AM »
Hi Jordi, welcome :)

I think I had to make 2 or 3 posts before I could post in Example Code and add an attachment. Just reply to another thread or two and you should be good to go.
My graphics card database: www.gpuzoo.com

Offline jordi

  • Jr. Member
  • *
  • Posts: 6
Re: Attach file to Post
« Reply #5 on: November 06, 2016, 10:31:25 AM »

Ok, i'll try.

Let CX = 3 and then DEC CX twice and see what happens. ;)

Thanks!